Interfacial Effect on Quantitative Concrete Stress Monitoring via Embedded PZT Sensors Based on EMI Technique

Sensing performance is crucial for real-world applications of the embedded piezoelectric lead zirconate titanate (PZT) sensors in concrete structures. Based on the electromechanical impedances (EMIs) obtained numerically and experimentally from the embedded PZT sensors, effects of installation orientation and interfacial roughness were investigated on their sensitivity and reliability for quantitative concrete stress monitoring. The numerical results suggest a better sensitivity in the embedded 90° PZT sensors, with planar normal perpendicular to the loading direction, where the conductance amplitude variation is 6.5 times of that of the 0° PZT sensors, with normal parallel to load direction. Further, the improved reliability of the PZT sensors with rough interfaces is observed experimentally, which makes them robust for concrete stress monitoring over a wider sensing range from 0 to 20 MPa. Based on the static analyses, it is noted that the sensing performance of the embedded sensor is significantly affected by the interfacial stiffness degradation induced by the enhanced strain surrounding the sensor. These findings suggest that delaying the interfacial stiffness degradation, i.e., with proper installation orientation and interfacial treatment, could improve the sensing performance of the embedded sensors for quantitative concrete stress monitoring.

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.