0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

On the Optical Characterization of Architectural Three-Dimensional Skins and Their Solar Control Potential

Auteur(s): ORCID

ORCID
ORCID
Médium: article de revue
Langue(s): anglais
Publié dans: Buildings, , n. 8, v. 12
Page(s): 1103
DOI: 10.3390/buildings12081103
Abstrait:

The use of second building skins is becoming a trademark in modern architecture, opening for innovative solutions, such as three-dimensional (3D) systems. This paper explores the potential of these systems to provide adequate solar protection to glazed façades by means of an advanced optical characterization. Spectral transmittance and reflectance of fourteen samples, belonging to several technological families, are measured with a built-in spectrophotometer, suitable to accurately characterize complex semi-transparent systems. Solar and lighting properties are then calculated. The normal optical properties strongly depend on the openness factor, thus the geometry primarily affects the performance. A total of 11 samples exhibit normal solar transmittance in the 40–53% range; the value decreases to 20% for the plissé metal grid and increases to 70% on average for metal meshes. The angular transmittance depends on the system texture geometry and its self-shading capabilities. It was found that such systems underperform as static conventional shading systems; however, one of the metal meshes, the plissé grid and the plastic grid exhibit relevant angular selectivity, with transmittance decay at 60° in the 58–72% range compared to the normal incidence value. The results show that some of the selected 3D systems provide adequate solar protection. The developed dataset can be used for early-stage design analyses, as well as for energy performance model input and validation.

Copyright: © 2022 by the authors; licensee MDPI, Basel, Switzerland.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10688616
  • Publié(e) le:
    13.08.2022
  • Modifié(e) le:
    10.11.2022
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine