0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Reliable data transmission method based on 6LoWPAN for building energy systems

Auteur(s):


Médium: article de revue
Langue(s): anglais
Publié dans: Building Services Engineering Research and Technology, , n. 5, v. 41
Page(s): 623-633
DOI: 10.1177/0143624419891521
Abstrait:

The building energy internet of things is based on radio frequency technology and a wireless sensor network that can collect building energy consumption data in real time. However, with the increasing complexity of wireless sensor network topology, there is a problem of insufficient IP address space relying on IPv4 protocol. In this paper, a design scheme of a building energy system based on 6LoWPAN network is proposed. IPv4/IPv6 address conversion is used to realise the access of IP addresses to each other, so as to monitor building energy consumption information anytime and anywhere. In view of the shortcomings of existing wireless network data transmission methods in low energy consumption and high reliability in building energy monitoring applications, a reliable data transmission method based on multipath routing coding algorithm is proposed. This strategy improves the transmission reliability of the network by increasing the number of redundant packets, and reduces the energy consumption of the network by reducing the number of transmission paths. The simulation results show that the proposed method can effectively improve the success rate of data packet transmission, reduce the standard energy consumption of sensor networks, and provide an effective method for the application of wireless sensor networks in building energy monitoring systems.

Practical application: This paper studies how to improve transmission reliability and energy efficiency in cluster-based WSN and proposes a multi-path transmission strategy for selective coding of intermediate cluster head nodes. The strategy improves the transmission reliability of the network by increasing the number of transmissions of redundant packets and reduces the network energy consumption by reducing the number of transmission paths. It has good use value for the actual development and application of the building energy consumption monitoring system.

Structurae ne peut pas vous offrir cette publication en texte intégral pour l'instant. Le texte intégral est accessible chez l'éditeur. DOI: 10.1177/0143624419891521.
  • Informations
    sur cette fiche
  • Reference-ID
    10477114
  • Publié(e) le:
    18.11.2020
  • Modifié(e) le:
    18.11.2020
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine